System-Wide
Options: SNMP Settings
SNMP Manager:
Enable SNMP Manager on Port 162: Select this option to
automatically load the SNMP manager application to receive traps from systems such
as S8700, S8300, S8500, and IP Office. SNMP Manager will run in the background and
can be monitored with the SNMP Viewer. To open the SNMP Viewer, click View>SNMP
Trap Viewer.
Track Product ID by: If you wish to track the WAN IP address
for use when assigning a Product ID select WAN IP. To track by Agent IP select
Agent IP.
Generic Traps: Select the trap types you want to be processed.
If not checked these trap types will be ignored by AlarmTraq.
SNMP Proxy Agent:
Send SNMP trap to NMS (HP OpenView) on port 161: Select
this option to automatically send an SNMP trap message to a 3rd party Network Management
System (NMS) when an alarm is received via modem or SNMP.
This option allows AlarmTraq to act as a proxy SNMP server to integrate
legacy Definity systems such as System-75, G1, G2 and G3 to be monitored by HP OpenView
or any 3rd party SNMP manager application.
Destination 1-4: Enter
the IP address of the SNMP Manager application you would like to send traps to.
This is the IP address of the HP OpenView server or other 3rd party SNMP Manager.
Make sure you DO NOT enter the IP address of the AlarmTraq server
in this field, as this will create an endless loop the next time an alarm is received.