Site-Profiles / Tests
Site-Profiles Tests tab
Field Descriptions for Site-Profiles Tests Tab
Automatically run command(s) after receiving alarms
Select this option to have AlarmTraq automatically re-connect with a system
after an alarm has occurred and attempt to resolve the alarm by issuing up to 6
pre-definied commands from the Maintenance Object Database. For more information
click here.
Last Alarm
A read-onlt field that shows the raw data of the last alarm received by this
site.
Schedule
Select the day-of-week that AlarmTraq should automatically test the INADS link.
You can select every day of the week or for testing many sites, a specific day
should be selected.
Command
Select a command to be sent to the system to test the INADS link:
testinads (Default)
Use this command for Communications Manager systems when connecting using a bash command from port 23 via telnet or port 22 via SSH. For more information
click here.
testcustalm
Use this command for Communications Manager systems when connecting using a bash command from port 23 via telnet or port 22 via SSH
to issue a 'CUSTOMER ALARM TEST' via SNMP trap . For more information
click here.
go shell-testinads
Use this command for Communications Manager systems when connecting using a SAT command from port 5023 via telnet or port 5022 via SSH. For more information
click here.
go shell-testcustalm
Use this command for Communications Manager systems when connecting using a SAT
command from port 5023 via telnet or port 5022 via SSH to issue a 'CUSTOMER
ALARM TEST' via SNMP trap . For more information
click here.
test inads-link
Use this command for Legacy Definity G3 system where the first OSS number is
assigned to dial AlarmTraq after an alarm. For more information
click here.
test inads-link 2
Use this command for Legacy Definity G3 system where the second OSS number is
assigned to dial AlarmTraq after an alarm. For more information
click here.
test alarm-origination
Use this command for Intuity/Definity AUDIX systems where the OSS number is
assigned to dial AlarmTraq after an alarm.
Test Now
Click this button to immediatly connect to the system and send the above test
command. This procedure is required before any automatic testing can be done to
verify that you have connectivity to the selected system.
Last Completed Test
A read-only field showing the last time a successful test has completed.
Next